Fitim
Ol samting bilong Nexusnova i save givim planti kain kain sais na ol samting bilong paip ol i bin wokim pastaim, olsem ol flange, ol ti, ol elbo, ol elbo, na planti moa. Ol prodak bilong mipela i karamapim ol kain kain samting, ol spesifikasen, na ol rot bilong koneksen bilong inapim ol askim bilong ol kain kain indastriel sekta.
Spesifikasen
NPS: 1⁄2 ~ 48", SCH: 5 ~ XXS.
Elbow:45℃elbow, 90℃elbow, 180℃elbow, long radius elbow, short radius elbow, long radius 180℃elbow, short radius 180℃elbow, reducing elbow, base elbow, left/right hand elbow, double branch elbow, quick elbow, threaded elbo, elbo bilong seniteri
Flange: TH (Threaded) flenj, SO (Slip-Long Welding) flenj bilong welding, BL (Blind) flenj, SW (Soket Welding) flange, LJ (Lap) flenj, WN (Wolding Nek) flenj blong flenj
Kap: Emisferik kap, eliptik/ov kap, dis kap, sferik kap, sferik kap
Reducer: Konsentrik Reducer, Eccsentrik Reducer
Tee: Stretpela Tee, Daunim Ti
-}Deliveri Stet: Pikim, polisim, wesan i pairap.
Standet
- ASTM B462
- ASTM B366
- ASME B16.9.
- ASME B16.11
Ol greid
- Nikel bes aloi
- Titanium aloi
- Steinles stiel
Ol piksa bilong prodak
Sais oltaim
Flenj oltaim sais (Klas 150)
| NPS | Ausait Daiamita , O | Minimum Tiknes bilong Flange, tf | Minimum Tiknes Lep Joint, tf | Diamita bilong Hub, X | Hab Daiamita Stat bilong Chamfer Welding Nek, Ah | Nominal Paip Sais, NPS | Minimum Tred Longpela Tred, T | Ausait Daiamita bilong Flange, O | Kona Bore Redius bilong Lap Flange na Paip, r | Dip bilong Soket, D | ||||
| Tred/ Slip-on/ Soket Welding, Y | Soket Welding, Y Lap, Y | Weldim Nek, Y | Minimum Slip-on/ Soket Welding, B | Minimum Lap, B | Weldim Nek/ Soket Welding, B | |||||||||
| 1/2 | 90 | 9.6 | 11.2 | 30 | 21.3 | 14 | 16 | 46 | 16 | 22.2 | 15.8 | 15.8 | 3 | 10 |
| 3/4 | 100 | 11.2 | 12.7 | 38 | 26.7 | 14 | 16 | 51 | 16 | 27.7 | 28.2 | 20.9 | 3 | 11 |
| 1 | 110 | 12.7 | 14.3 | 49 | 33.4 | 16 | 17 | 54 | 17 | 34.5 | 34.9 | 26.6 | 3 | 13 |
| 5/4 | 115 | 14.3 | 15.9 | 59 | 42.2 | 19 | 21 | 56 | 21 | 43.2 | 43.7 | 35.1 | 5 | 14 |
| 3/2 | 125 | 15.9 | 17.5 | 65 | 48.3 | 21 | 22 | 60 | 22 | 49.5 | 50 | 40.9 | 6 | 16 |
| 2 | 150 | 17.5 | 19.1 | 78 | 60.3 | 24 | 25 | 62 | 25 | 61.9 | 62.5 | 52.5 | 8 | 17 |
| 5/2 | 180 | 20.7 | 22.3 | 90 | 73.0 | 27 | 29 | 68 | 29 | 74.6 | 75.4 | 62.7 | 8 | 19 |
| 3 | 190 | 22.3 | 23.9 | 108 | 88.9 | 29 | 30 | 68 | 30 | 90.7 | 91.4 | 77.9 | 10 | 21 |
| 7/2 | 215 | 22.3 | 23.9 | 122 | 101.6 | 30 | 32 | 70 | 32 | 103.4 | 104.1 | 90.1 | 10 | - |
| 4 | 230 | 22.3 | 23.9 | 135 | 114.3 | 32 | 33 | 75 | 33 | 116.1 | 116.8 | 102.3 | 11 | - |
| 5 | 255 | 22.3 | 23.9 | 164 | 141.3 | 35 | 36 | 87 | 36 | 143.8 | 144.4 | 128.2 | 11 | - |
| 6 | 280 | 23.9 | 25.4 | 192 | 168.3 | 38 | 40 | 87 | 40 | 170.7 | 171.4 | 154.1 | 13 | - |
| 8 | 345 | 27.0 | 28.6 | 246 | 219.1 | 43 | 44 | 100 | 44 | 221.5 | 222.2 | 202.7 | 13 | - |
| 10 | 405 | 28.6 | 30.2 | 305 | 273.0 | 48 | 49 | 100 | 49 | 276.2 | 277.4 | 254.6 | 13 | - |
| 12 | 485 | 30.2 | 31.8 | 365 | 323.8 | 54 | 56 | 113 | 56 | 327 | 328.2 | 304.8 | 13 | - |
| 14 | 535 | 33.4 | 35.0 | 400 | 355.6 | 56 | 79 | 125 | 57 | 359.2 | 360.2 | - | 13 | - |
| 16 | 595 | 35.0 | 36.6 | 457 | 406.4 | 62 | 87 | 125 | 64 | 410.5 | 411.2 | - | 13 | - |
| 18 | 635 | 38.1 | 39.7 | 505 | 457.0 | 67 | 97 | 138 | 68 | 461.8 | 462.3 | - | 13 | - |
| 20 | 700 | 41.3 | 42.9 | 559 | 508.0 | 71 | 103 | 143 | 73 | 513.1 | 514.4 | - | 13 | - |
| 24 | 815 | 46.1 | 47.7 | 663 | 610.0 | 81 | 111 | 151 | 83 | 616 | 616 | - | 13 | - |
Elbo
| Longpela Elbows bilong Redius | |||
| Nominal Paip Sais | Ausait Daiamita long Bevel, mm(in.) | Senta-long-End,mm (long.) | |
| 90-dig Elbo,A | 45-dig Elbo,B | ||
| 1/2 | 21.3(0.84) | 38(1.50) | 16(0.62) |
| 3/4 | 26.7(1.05) | 38(1.50) | 19(0.75) |
| 1 | 33.4(1.32) | 38(1.50) | 22(0.88) |
| 5/4 | 42.2(1.66) | 48(1.88) | 25(1.00) |
| 3/2 | 48.3(1.90) | 57(2.25) | 29(1.12) |
| 2 | 60.3(2.38) | 76(3.00) | 35(1.38) |
| 5/2 | 73.0(2.88) | 95(3.75) | 44(1.75) |
| 3 | 88.9(3.50) | 114(4.50) | 51(2.00) |
| 7/2 | 101.6(4.00) | 133(5.25) | 57(2.25) |
| 4 | 114.3(4.50) | 152(6.00) | 64(2.50) |
| 5 | 141.3(5.56) | 190(7.50) | 79(3.12) |
| 6 | 168.3(6.62) | 229(9.00) | 95(3.75) |
| 8 | 219.1(8.62) | 305(12.00) | 127(5.00) |
| 10 | 273.0(10.75) | 381(15.00) | 159(6.25) |
| 12 | 323.8(12.75) | 457(18.00) | 190(7.50) |
| 14 | 355.6(14.00) | 533(21.00) | 222(8.75) |
| 16 | 406.4(16.00) | 610(24.00) | 254(10.00) |
| 18 | 457.0(18.00) | 686(27.00) | 286(11.25) |
| 20 | 508.0(20.00) | 762(30.00) | 318(12.50) |
| 22 | 559.0(22.00) | 838(33.00) | 343(13.50) |
| 24 | 610.0(24.00) | 914(36.00) | 381(15.00) |
| 26 | 660.0(26.00) | 991(39.00) | 406(16.00) |
| 28 | 711.0(28.00) | 1067(42.00) | 438(17.25) |
| 30 | 762.0(30.00) | 1143(45.00) | 470(18.50) |
| 32 | 813.0(32.00) | 1219(48.00) | 502(19.75) |
| 34 | 864.0(34.00) | 1295(51.00) | 533(21.00) |
| 36 | 914.0(36.00) | 1372(54.00) | 565(22.25) |
| 38 | 965.0(38.00) | 1448(57.00) | 600(23.62) |
| 40 | 1016.0(40.00) | 1524(60.00) | 632(24.88) |
| 42 | 1067.0(42.00) | 1600(63.00) | 660(26.00) |
| 44 | 1118.0(44.00) | 1676(66.00) | 695(27.38) |
| 46 | 1168.0(46.00) | 1753(69.00) | 727(28.62) |
| 48 | 1219.0(48.00) | 1829(72.00) | 759(29.88) |
| Sotpela Redius Elbows | ||
| Nominal Paip Sais(NPS) | Ausait Daiamita long Bevel,mm(in) | Senta-long-} End,A,mm(mmond(in.) |
| 1 | 33.4(1.32) | 25(1.00) |
| 5/4 | 42.2(1.66) | 32(1.25) |
| 3/2 | 48.3(1.90) | 38(1.50) |
| 2 | 60.3(2.38) | 51(2.00) |
| 5/2 | 73.0(2.88) | 64(2.50) |
| 3 | 88.9(3.50) | 76(3.00) |
| 7/2 | 101.6(4.00) | 89(3.50) |
| 4 | 114.3(4.50) | 102(4.00) |
| 5 | 141.3(5.56) | 127(5.00) |
| 6 | 168.3(6.62) | 152(6.00) |
| 8 | 219.1(8.62) | 203(8.00) |
| 10 | 273.0(10.75) | 254(10.00) |
| 12 | 323.8(12.75) | 305(12.00) |
| 14 | 355.6(14.00) | 356(14.00) |
| 16 | 406.4(16.00) | 406(16.00) |
| 18 | 457.0(18.00) | 457(18.00) |
| 20 | 508.0(20.00) | 508(20.00) |
| 22 | 559.0(22.00) | 559(22.00) |
| 24 | 610.0(24.00) | 610(24.00) |
Ol aplikesen
Ol prodak we oli saplaem longOl samting bilong Nexusnovaol i save yusim planti long ol indastri olsem Oil & Ges, Aerospace & Eviation, Pawa & Eneji, Marin Enjiniaring, Konstraksen, Otomotiv, Medikol, na Prosesing bilong Kaikai. Global futprin blong mifala i go kasem Saot-is Esia, Midel Is, Yurop, Afrika, mo tugeta Not mo Saot Amerika, wetem ol patnasip we oli trastem oli bildim long kwaliti, reliabiliti, mo seves.
Lojistik
InsaitOl samting bilong Nexusnova, olgeta prodak i stap long paket bilong bihainim ol intanesenel standet bilong stopim bagarap o lus long taim bilong transit. Long liklik prodak, wanwan yunit i save pas long ol plastik beg i gat anti-}statik na ol i kisim insait long ol strongpela diwai kes. Ol bikpela prodak i save stap long ol diwai kes wantaim ol samting bilong kusen ol i wokim long laik bilong ol yet (olsem, ol fom inser o VCI pepa) namel long ol leit bilong stopim abrasen. Plis luksave olsem ol diwai kes i save kisim moa kos, na tu ol samting bilong paketim na ol freit sas i go antap-}li bilong balus trenspot bikos long ol volium bilong volium weit. Blong mekem eksperiens blong ol kastoma i kam gud moa, mifala i givim tu ol solusen we oli stret long pakej blong ol spesifik rikwaemen, olsem vekim-}siling blong ol envaeromen we i mekem man i harem nogud o ISO-}komplian denja materiel lebol.
Ol freit bilong solwarai stap yet olsem rot we i save kamap planti taim na i save kostim -i wok bilong planti oda, na ol i save givim ol kwotesen long FOB, CFR, o CIF tok. Bilong ol samting yu mas mekim hariap,balus i karim balusol opsen tu i stap.
FAQ
Q: 1. Wanem ol kain fiting yu save saplaim?
A: Mipela i save saplaim planti kain kain hai-pefomens paip, tiub, na ol flens fiting ol i wokim tasol long ol premium nikel aloi, ol titanium aloi, na ol spesel steinles stiel.
Q: 2. Bilong wanem yu mas makim ol samting yu wokim long ol samting bilong yu?
A: Ol nikel aloi bilong mipela, taiteniam, na ol spesel steinles stiel i save givim strongpela korosen resistens, hai- temperature strong, kraiojenik strong, na longpela sevis laip long ol diman envairomen we ol standet materiel i no save wok gut.
Q: 3. Olsem wanem mi ken makim ol stretpela samting?
A: Kontaktem ol teknikol ekspet blong mifala wetem ol spesifik aplikesen kondisen blong yu (kemikol, tempereja, presa) blong kasem bes rekomendesen blong ol samting.
Q: 4. Wanem ol standet bilong yu i stret?
A: Ol fiting bilong mipela i bihainim ol ki intanesenel standet olsem ASME, DIN, JIS, ASTM, na NACE bilong sour sevis, wantaim ol ful materiel setifikesen i stap.
Q: 5. Yu save givim ol kastom fiting?
A: Yes. Mipela i save wokim ol kastom sais, ol seip, na ol spesifikasen i go aut long ol standet katalog samting.
Q: 6. Wanem nao kwaliti kontrol proses blong yu?
A: Mifala i mekem sua se i gat kwaliti tru long strong verifikasen blong ol materiel, ol dimensenol jek, NDT (olsem we i nid), mo komprehensif setifikesen.
Q: 7. Wanem nao tipikol lid taem blong yu?
A: Ol taem blong lid oli defren folem ol spesifik samting, be mifala i givim ol stret estimet wetem evri kwotesen.
Q: 8. Wanem ol paket yu save yusim long ekspot?
A: Mipela i yusim strongpela, lukautim ekspot paket (ol diwai kret/plywood bokis, VCI proteksen) i mekim gutpela intanesenel deliveri.
Q: 9. Olsem wanem mi ken askim long wanpela kwot o teknikel sapot?
A: Kontaktem Sels tim blong mifala blong ol kwot o Teknikol tim blong mifala blong kasem sapot tru long email/fon/websaet fom.